MEGA Vertical Windlasses
Vertical windlass models have a main vertical shaft and horizontal gypsy, and are available in two configurations. VRC has a gypsy and independent capstan, whilst the VR has a gypsy and low profile top only.
The vertical configuration allows for single and twin installations with the advantage of installing the windlasses in various positions. This facilitates the positioning of anchor pipes and spurling pipes. In some cases it may be preferable to install windlasses closer to the centre line or further apart.
Vertical windlasses require less deck space than a horizontal windlass and vertical capstans have operational advantages for mooring purposes due to the radial scope of the lead for mooring lines. For servicing and lubrication all running gear is readily accessible.
Planetary drives are available on vertical models with AC and Hydraulic brake motors fitted, right angle drives are available for all installations throughout the ranges. AC motors require to be supported to the deck structure.
Hydraulic drives are fitted with counter balance valves to prevent runback. Heavy-duty concealed dog clutch drives n larger models ensure positive drive at all times, hand wheels and brake bands to chain gypsies provide infinite control of braking.
Standard Features
- Single Speed Reversible Motor
- Independent operation of gypsy and capstan
- Easy servicing: disassemble from top and bottom without disturbing deck plate fastenings
- Chain pipe
- Chromed bronze or polished 316L stainless steel
- Knurled capstan for line grip
- Stainless steel drive shaft
- Gearbox and motor can be rotated to fit confined space below deck
- Heavy duty totally sealed high efficiency in line or right angle
- Dog clutch (except 4000 / 4500) and clutch handle (Brake band and brake handle
- AC torque limiter supplied with all anchor windlass models from 6000 to 24000 windlasses (in special cases the torque limiter may not be required when variable frequency drives are installed (VFD’s)
Options:
- Gypsy and low profile top (VR)
- Polished bronze finish
- Polished stainless steel finish
- Two speed motors and variable speed controls
- Inline or 45° universal brake handwheel control
- Increased working speed
- Mirror image
- Fluted capstans for line grip
- Variable brake hand positioning to optimize deck space and handwheel location
- High pressure hydraulic motors standard on larger models and optional on other models
- Hydraulic and electric power packs and controls
- Raised bases and plinths for equipment
- Chain pipe with nylon or bronze rollers
- Control cabinets for electric AC models for in one or two speed or variable speed drives (VFD’s)
-
-
$1.00Muir design and manufacture one of the largest ranges of anchoring and mooring systems for vessels up to 150m. With several awards to its credit, Muir is a preferred supplier of anchoring systems for many of the world’s largest and finest yachts. The Mega Yacht range is one of a few manufacturers worldwide that is capable of providing a range of standard and fully customized windlasses and systems, with exceptional performance and lifting capacity. A Muir anchoring system provides long term reliability, durability and dependability. Learn More -
$1.00Vertical windlass models have a main vertical shaft and horizontal gypsy, and are available in low profile (VR) or independent capstan (VRC) configurations. The vertical configuration allows for single and twin installations allowing for windlasses to be installed in various positions, closer to the centre line or further apart. Muir vertical windlass design innovation enables disassembly of the running gear above the deck plate and removal of the drive gear below deck leaving the deck plate and chain pipe/roller intact. AC torque limiter supplied with all anchor windlass models from 6000 to 24000 windlasses (in special cases the torque limiter may not be required when variable frequency drives are installed (VFD’s). Learn More -
-
-
